Bottles/Cages

The RM-10 is designed specifically for bikes featuring the Ritchey 10mm Saddle Clamp standard. It enables the rider to replace the cylinder nuts that secure the clamp to the seatpost with a bracket that holds a hydration system. The Arch clamp allows for 14° of adjustment allowing the cage to slide under saddles with a transition tab. To add to the versatility this system can run 1 or 2 cages to customize for training or racing. - Replaces the cylinder nuts on the 10mm seatpost saddle clamp standard. - Multiple bolt placement along bracket for multi-saddle compatibilty - Patent pending arch clamp provides 14 degrees of adjustment - Armrest Material: 6061-T6 AL - Post Material: Steel - Adjustment: 14 degrees of tilt adjustment - Cage Material: Injected Nylon/Glass Fiber (Vise Cage) - Capacity: 1 or 2 cage compatible - Cage: Vise - Weight: 130G - Includes 1 lightweight Profile Design Cage Compatible Bikes - Cervelo P-Series - SCOTT Plasma - GURU - Stevens - Louis Garneau - Diamondback - Kestrel 4000 - Fuji D6/Norcom - BH Aero - Neil Pryde

Profile Design's RM-L system provides a sleek and aerodynamic way to address your on-the-bike hydration needs. The strong metal bracket attaches quickly and easily to your saddle rails. It has spots for up to three bottle cages of your choice. It even includes two lightweight Profile Design Kages to get you started. Placing your bottles behind the saddle creates a cleaner aerodynamic profile for your bike, resulting in time and energy savings over the course of your next Tri.

Rear mount hydration system mounts to standard 7mm saddle rails and sits flush to rear of saddle. Featuring an innovative elliptical arch clamp for tilt adjustability. Carries 1 or 2 water bottle. - Patent pending arch clamp provides 14 degrees of adjustment - Material: Precision machined and stamped 6061-T6 aluminum - Cage Material: Injected Nylon/Glass Fiber (Vise Cage) - Capacity: 1 or 2 cage compatible - Cage: Vise - Weight: 200G - Includes 2 lightweight Profile Design Vise Cages

Profile Design's Razor 2 Bottle is a 14-ounce, aerodynamic bottle. Adding this aero beauty to a triathlon or time trial bike is one of the best, easiest and most affordable ways to streamline your machine for additional free speed. It fits nicely on road bikes, too, for improved aerodynamics as well. The Razor 2 Bottle Cage is sold separately.

Profile Design's Razor 2 Bottle System consists of their featherweight Profile carbon Kage and their 20-ounce Razor aero bottle. Adding this aero beauty to a triathlon or time trial bike is one of the best, easiest and most affordable ways to streamline your machine more for additional free speed. It fits nicely on road bikes, and improves the aerodynamics there, too.

The ideal cage for tight frame designs and BTA mounts. The cage body can be flipped for either right side or left side removal. - Easy load design for compact frames - Side-loader design makes this cage ideal for small frames that leave little room for removing bottles in the typical forward and up motion. Suitable for both road and mountain use. - BTA Mount Optimized: The cage is optimized for BTA (between the arms) bottle mounts where the natural motion is to pull the bottle sideways. Specs - Construction: Injected Nylon/Glass Fiber - Weight: 52g

Perfect for mixing up your Perpetuem, Recoverite, and protein drinks. - Stay-open flip cap - Extra-wide mouth - Screw on lid, without rubber seal and leak free! - Easy to use, easy to clean, dishwasher safe - Lightweight and portable - Fits in most drink holders - Mix, pour, store—all in the same container

Clear, wide-mouth bottle with a high-flow lid - Easy to clean and fill - Soft rubber tip is easy on the teeth and won't leak - Clear bottles with red Hammer logo - Wide-mouth water bottle from Specialized - Note: lid color may vary

32 oz. BPA-Free Nalgene bottle - Made of super-tough Tritan copolyester - Attached loop-top cap that won't come loose - Ruby red colored bottle, black lid - Large opening easily accommodates ice cubes - Fits most water purifiers and filters, and makes hand-washing a breeze. - 32 oz. (1qt.) - Resistant to staining. - Resistant to retaining odors. - Withstands temperatures from -135ºC (-211ºF) to 135ºC (275ºF). - Dishwasher Safe. (top rack only)

SpeedCup is the quick and easy watering solution; whether you're racing in the Rockies or backpacking in the Himalayas. It's lightweight, easy to hold, reusable and collapsible so you can tuck it almost anywhere. Made by HydraPak. - Flexible design allows you to crush the cup and stuff it anywhere, from your running vest to your camp kit - Integrated finger loop provides support when drinking or pouring - Free standing when empty or full - Made of ultra-durable, abrasion resistant TPU & RF welded seams for superior durability and elasticity - Can be frozen or filled with hot water (max temp 60° C / 140° F) - Top-rack dishwasher safe - Safe and reliable, 100% BPA & PVC free - Capacity: 200 ml / 6.7 fl oz - Weight: 10g/0.4 oz

-All welded tubular stainless steel -Premium satin finish, titanium -Weighs 48 grams