Packs/Racks/Baskets

This hardside global carry-on is impact resistant and easily navigates over any terrain. Features - Effortless navigation from the very first step with a telescoping handle that minimizes sway and efficiently transfers power to the wheels - Made in Europe, this lightweight, stylish and impact-resistant luggage is comprised of 100% polycarbonate - Designed to last with internal corner protectors, a rigid frame, and a reinforcing front panel for added protection - Contents stay secure during travel with TSA locks and a puncture-resistant zipper backed by a solid inner frame - Easily navigate from doorstep to destination with oversized rear wheels that easily glide over rough terrain and smaller, recessed front wheels that increase interior space - Maximize packing space and enjoy a quiet roll with a felt liner that contours the case and absorbs vibrations in transit - Personal information remains concealed with an integrated ID slot that retracts into the back of the case - Belongings are held securely in place with an adjustable, internal compression system - Integrated feet allow the bag to rest on its side without tipping - Dimensions: 9 x 14 x 21.5 in - Weight: 8.6 lb - Volume: 33L - Material: Polycarbonate

Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - Fits up to 29 x 3-inch tires, with room for fenders. - Front or rear mountable. - Works with all dropper posts. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability, and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55lbs when eyelet mounted. - For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black. - 960g including all hardware and extenders. - Made in Taiwan. - Lifetime warranty!

The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Short fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is for maximum mud clearance and fits tires up to 29 x 3.25" - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2" (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty

High visibility is so important to us at Ortlieb because it is a matter of safety. Both the waterproof, polyurethane-coated Cordura fabric in neon yellow and the black fabric parts of this bag are densely interwoven with high-luminosity reflective yarn. This composition turns the entire bag into an eminently visible reflector when it is picked up in the headlights of passing cars. The waterproof Sport-Packer is perfectly suitable as lowrider pannier in the front, "small" rear pannier or for children's bikes. The QL2.1 fixing offers quick and comfortable singlehanded mounting to the rack. - Classical pannier (pair) with roll closure in bright reflective color - QL2.1 mounting system for racks with max. 16 mm tube diameter - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - 20 mm hook available as separate accessory (e.g. for E-bikes) - PVC-free reflective fabric - Increased visibility when hit by headlights due to highly visible reflective fabric in neon yellow and black - Can be used individually or as pairs for the rear or front rack (low-rider) - Including integrated inner pocket and shoulder strap - Ideal for use on children's/youth bicycles - Highly reflective 3M Scotchlite reflector - Can be easily cleaned inside

Backpack or pannier? With the versatile and innovative Vario PS, you no longer have to ask yourself this question. Featuring our Quick-Lock attachment systems on one side and a padded carrying system with chest strap and ergonomic shoulder straps on the other, The Vario PS transforms from backpack to pannier faster than ever before. A so-called Flap with an integrated pocket covers the side that is not in use. And for any items that you need quick access to, there is a zippered outer pocket. Everything else can be accessed via the practical and proven roll closure, including your laptop for which a padded compartment is provided. This waterproof hybrid bag is PVC-free and sustainably manufactured in Germany. Further features: - Reflectors - Reflective yarn in the shoulder straps - Mesh outer pocket on the side

You're lookin' at the Surly Big Dummy Bag Version 2.0. Just like the original, it's designed to work with Dummy-style rail systems found on cargo bikes like our Big Easy, Big Dummy, and Big Fat Dummy. We've made it easier to install, simpler to use, and refined its size and shape to better suit the stuff we haul most often. The sequel is slightly smaller, but you can still cram two full grocery bags in there on shopping day. Three if you like your potato chips pulverized. The Big Dummy Bag features an expandable cargo flap and side panels that can lie flat or cinch up to accommodate loads of varying dimensions. It also has two sizeable inner pockets with a dedicated divider so you can keep your legal documents tidy. It's furnished with adjustable daisy chains, straps, and buckles to help you secure bulky shit that may not fit otherwise, as well as three stainless steel drainage ports so you can hose it out after hauling your compost to the dump. Lastly, the bag's main body is tough 1680D nylon and its liner is 400D nylon. The material is also bluesign® Approved. So are the buckles and other hardware. This means the materials are sustainably produced to have the lowest possible impact on humanoids and our environment. - 22.5L capacity per bag

Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.

Ideal for multiday tours and self-supported races, the ORTLIEB Gravel-Pack duo offers you a combined payload of 25 liters for additional gear such as mess kits, food and other “luxury” items. Mounting the Pack to your lowrider bike rack allows you to maintain a low center of gravity and undiminished off-road agility despite your extra gear. While the Pack’s streamlined design – without inside pockets and a shoulder-strap pad – helps to keep it in the featherweight class, its lightweight, wear-resistant material withstands even the harshest of rock and gravel conditions you encounter on your way. And no matter how wet the weather, your things will stay dry thanks to the proven ORTLIEB-waterproof quality and roll closure. With the QL2.1 system and two mounting hooks, the Gravel-Pack remains tightly attached to your bike rack while you ride over hill and dale on your gravel grinder, mountain bike or fatbike. Ideal for adventurers: The ORTLIEB Gravel-Pack, as a single bag with the proven Quick-Lock3.1 mounting system that offers you a generous 14.5 liters of storage space for all your additional gear. The single bag effortlessly withstands the toughest conditions on gravel and or rocky trails, thanks to its lightweight and abrasion-resistant material. Even adverse weather can’t harm your gear because the bag is equipped with the proven ORTLIEB roll closure, guaranteeing absolute waterproofness. With the Quick-Lock3.1 mounting system and its three flat attachment points, the Gravel-Pack is securely and stably attached to the rack while remaining lightweight. You can confidently go on discovery tours with your gravel, mountain, or fat bike and fully focus on the adventure. Whether you’re going on a multi-day tour or participating in a self-supported race, the ORTLIEB Gravel-Pack is the reliable companion that keeps your gear safe and dry while you explore the world. FURTHER PRACTICAL DETAILS - Reflectors on the sides of the bag Bags with the Quick-Lock3.1 mounting system include a mounting set that allows you to use the bag on standard luggage racks without the integrated QL3.1 mounting elements. The mounting set weighs only 140 g and attaches securely to the rack. If your luggage rack already has an integrated QL3.1 mount, such as our Quick-Rack, you do not need the mounting set.

Ideal for multiday tours and self-supported races, the ORTLIEB Gravel-Pack duo offers you a combined payload of 25 liters for additional gear such as mess kits, food, and other "luxury" items. Mounting the Pack to your lowrider bike rack allows you to maintain a low center of gravity and undiminished off-road agility despite your extra gear. While the Pack's streamlined design – without inside pockets and a shoulder-strap pad – helps to keep it in the featherweight class, its lightweight, wear-resistant material withstands even the harshest of rock and gravel conditions you encounter on your way. And, no matter how wet the weather, your things will stay dry thanks to the proven ORTLIEB-waterproof quality and roll closure. With the QL2.1 system and two mounting hooks, the Gravel-Pack remains tightly attached to your bike rack while you ride over hill and dale on your gravel grinder, mountain bike or fatbike.

Thanks to the unique Seat-Lock attachment system, the Seat-Pack QR is quickly and securely mounted and just as speedily removed, completely residue-free. An adapter even enables the use of a dropper post, making the innovative Seat-Pack QR suitable for a variety of bikes. DETAILS Whether you're riding singletrack, mountain passes or gravel routes, with the waterproof Seat-Pack QR you are ready for every bike adventure. With the innovative and patented Seat-Lock attachment system and abrasion-resistant nylon fabric, the bag is super stable, quickly mounted and just as quickly removed without leaving any residue. And with the help of a special adapter of just 4.3 centimeter in width, this bag can even be used with a dropper post. The internal reinforcement and five compression straps ensure that the contents are packed tightly and securely. A valve with a handle strap helps to compress the pack volume, and the elastic cord on the outside allows for the attachment of additional gear. To prevent damage from tire contact, a protective plate is attached to the underside of the Seat-Pack QR, which also doubles as a fender. OTHER PRACTICAL FEATURES: - Our reflector ensures added visibility and safety - A daisy chain allows for the attaching of a rear light COMPATIBILITY NOTICE YOU CAN EASILY CHECK IF YOUR SADDLE IS COMPATIBLE: 1. The saddle rails must have a bend of at least 34°. 2. The seat post clamp must be at least 13mm from the middle of the bend in the saddle rail. There must also be at least 13mm from the middle of the bend to where the rail connects to the back of the saddle. 3. The bottom edge of the saddle (at the side) must be at least 14mm higher than the bottom edge of the saddle rail.

Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 8 to 16.5 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you’re out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. Thanks to its elastic drawstrings on the top, the 16.5-liter model offers additional space for items you need to be able to access quickly. This model needs only 15 centimeters of space on your seat stem. FURTHER FEATURES: - Reinforced fabric at all points of contact to the seat - Vertical daisy chain for rear light - Also suitable for carbon seat stems - Lightweight design - Four 3M Scotchlite reflectors available for full extension

The Terrapin® 8L is the smaller version our flagship Terrapin® System 14L. The Terrapin 8L maintains all of the Terrapin's best known features including a mount that stays on the bike with a custom fitted drybag for easy packing. With 8 liters of capacity, it is perfect for most lightweight bikepacking trips and fits bikes with low tire clearance. It is perfectly sized for small framed bikes, including plus bikes with inherently diminished clearance. The Indie-Rail attachment system is a progression from conventional bikepacking bag mounts where the rail straps are fixed to the top center of the bag. With Indie-Rail, each saddle rail is cinched down hard to the sides of the bag virtually eliminating side to side bag sway without the need for external hardware. We combine this with rigid internal structure and active camming buckles to prevent straps from slipping on rough terrain. The mount is stiffened on all sides including an external plastic bottom sheet which protects the bottom of the bag like a fender. A composite internal top sheet provides a solid and stable platform for the strap points and transmits the vertical load to the seatpost connection. - Indie-Rail attachment system and active camming hardware maximizes stability without added hardware - Radio frequency welded drybag with one way, low profile purge valve - Adjustable capacity; Fold under the top storage deck and use top mounted buckles to secure smaller loads - X-Pac panels that are two times as abrasion resistant as standard VX material - Protective external plastic bottom frame sheet - User friendly side release buckles to secure drybag - Aluminum hardware at high stress points - Composite internal top frame sheet - Hypalon slots on drybag for rear light attachment - Bungee loop on top of holster for additional storage - Foam stiffened side panels with fiberglass compression stays - Carbon seatpost friendly Fit: Minimum 7 in / 17.8 cm of tire clearance (shown as line A) from saddle rails to tire. Important information on use and fit: - This product is not designed for use with dropper seatposts. - This bag is for carrying soft, pliable objects. Sufficiently pad any hard edge objects like cookware to prevent premature wear. - It is mandatory to check tire clearance prior to use, especially with full suspension bikes. Bag contact with a tire can cause a bad wreck and ruin your day. Tire damage to the bag is not covered by warranty. - Please evaluate how your system works well before a planned trip.

The waterproof ORTLIEB Handlebar-Pack is an indispensable item when you’re on a bikepacking tour in the great outdoors. This Handlebar-Pack offers a payload of 9 liters for your sleeping bag and pad. It also helps to secure a balanced distribution of gear and weight across your bike. Thanks to the roll closures at both ends, you can always gain quick access to your gear. Compression belts on the outside enable the stowing and attachment of additional equipment. Moreover, the Handlebar-Pack comes with four hooks to enable the attachment of an ORTLIEB Accessory-Pack for additional stowage space. Consisting of spacers and two strong Velcro straps, the mounting system ensures secure attachment to any handlebar type, including carbon handlebars. The pack’s stiffened interior and head-tube attachment offer additional stability – in any terrain. This 9L model belongs to the compact class of bikepacker handlebar rolls. With a length of only 40 cm, this waterproof handlebar bag is the right choice for bikepackers with off-road drop bars and both racing and hybrid-style handlebars. This compact Handlebar-Pack is also extremely lightweight. FURTHER FEATURES: - Hooks for attaching an ORTLIEB Accessory-Pack - Also suitable for carbon handlebars - Mounting straps with convenient Velcro closures - Lightweight design - High luminosity 3M Scotchlite reflectors

The ORTLIEB Toptube Frame-Pack is the smart solution for all who want to use their frame's main triangle for storage space without having to do without their water bottle. The solution also works for those who have full-suspension mountain bikes with limited triangle space. With its 4-liter payload, the Toptube Frame-Pack provides plenty of space for heavy equipment such as tent poles, tools, and food supplies, while also helping to secure a low center for improved rising performance. And given that the bag and its zipper are waterproof, you can even cross rivers on your bikepacking tour without worrying about your stuff getting wet. The Frame-Pack attaches easily to your top tube and seat tube with the help of sturdy and highly adhesive Velcro straps. FURTHER FEATURES: - Ideal for all bikes with limited triangle space - Reflecting logo ADVICE: Suitable for carbon fiber frame.

The waterproof ORTLIEB Handlebar-Pack is an indispensable item when you’re on a bikepacking tour in the great outdoors. This Handlebar-Pack offers a payload of either 15 liters for your sleeping bag and pad. It also helps to secure a balanced distribution of gear and weight across your bike. Thanks to the roll closures at both ends, you can always gain quick access to your gear. Compression belts on the outside enable the stowing and attachment of additional equipment. Moreover, the Handlebar-Pack comes with four hooks to enable the attachment of an ORTLIEB Accessory-Pack for additional storage space. Consisting of spacers and two strong Velcro straps, the mounting system ensures secure attachment to any handlebar type, including carbon handlebars. The pack’s stiffened interior and head-tube attachment offer additional stability – in any terrain. FURTHER FEATURES: - Hooks for attaching an ORTLIEB Accessory-Pack - Also suitable for carbon handlebars - Mounting straps with convenient Velcro closures - Lightweight design - High luminosity 3M Scotchlite reflectors

Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 7 to 11 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you're out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. The Seat-Pack is available in two sizes. This model needs only six centimeters of space on your seat stem. That's why the more compact model is ideal for smaller frame sizes, full-suspension bikes, and adjustable seat stems. FURTHER FEATURES: - Reinforced fabric at all points of contact to the seat - Vertical daisy chain for rear light - Also suitable for carbon seat stems - Lightweight design - Four 3M Scotchlite reflectors available for full extension

A weather-resistant backpack with secure entry points and organization for the modern commuter. Features - Protect a 15.6" laptop and 10.5" tablet in the thickly padded storage pockets - Two way access to a laptop and main compartment through top-load entry or side zipper - Store small accessories in exterior side access pocket with a zippered mesh pocket and slip pockets for organization - Magnetic flap conveniently fastens in multiple positions for added weather protection - Easily access a metro card on your commute with the shoulder strap slip pocket - Additional accessory storage includes a quick access top-loading zippered pocket, front pocket with secure magnetic flap closure, and a hidden back panel pocket - Main compartment organization includes a secure mesh pocket plus two padded, structured pockets for files, a notebook, or a tablet - Carry in comfort with a padded, mesh back panel designed for airflow and breathability - Keep a water bottle close or quickly stash items in the large side pocket - Designed with durable 420D nylon material with a water-resistant finish, YKK zippers, and reflective details Technical specifications - Dimensions: 13.0 x 10.6 x 19.7 in - Laptop compartment dimensions: 15.2 x 1.2 x 10.4 in - Weight: 2.60 lb - Volume: 27 L - Material: Nylon

The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2? (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty

Do you like to take your bike shopping so as to avoid traffic jams and desperate searches for parking spots? And to get some good exercise and burn calories that you won’t have to count when you return for dinner? No matter whether you need to take a quick trip to the supermarket in the evening or to the farmer’s market on Saturday, your Velo-Shopper has a big hatch and an 18-liter payload. That’s enough for a lot of stuff! And you can conveniently open and close the magnetic snap buckle with one hand. Made of waterproof, abrasion-resistant nylon fabric, the Shopper can be attached to your bike rack with the proven Quick-Lock2.1 system. And then simply sling the Velo-Shopper over your shoulder with the detachable strap when you reach your destination. Go ahead and fill the Shopper to the brim because its stiffened inside construction will help to prevent crushing. FURTHER FEATURES: - zippered inside pocket with penholder and carabiner for keys - secure attachment to virtually all bike racks with tube diameters of 8mm to 16mm - large, high-luminosity 3M Scotchlite reflectors on the sides - sturdy base for anti-tilt stability

This carbon Mukluk specific frame bag incorporates the best features of our classic Ranger frame bag. This frame bag is for the 2017-2021 year models of the Salsa carbon Mukluk. Your frame size correlates to the frame bag size; a small fits a small carbon Mukluk. If you have an aluminum Mukluk, we recommend the Ranger. Features: - Revelate exclusive RevX-PAC panels that are 2 times as abrasion resistant as standard VX material. - Zipstretch construction pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag. - Industry leading #10 Molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers. - Exit port in main compartment for hydration tube or wires. - Zippered left side pocket on sizes SM-XL. - Bags feature one main compartment with vertical divider. - Expanding taper front section for increased volume at head tube. - Stretch mesh internal pocket. - Front top tube attachments accommodate top tube packs. Weight: - SM: 11 oz - MD: 12 oz - LG: 13 oz - XL: 15 oz Materials: - RevX-Pac Fabric: Dimension Polyant VX-21 with proprietary abrasion resistant finish; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining; closed cell foam padded tube sections. Made in the USA with domestic and imported materials. These frame bags are manufactured and distributed by Revelate Designs and have no affiliation with Salsa Cycles. Salsa Cycles is a trademark of Quality Bicycle Products.

If you like to ride useful bikes, racks make a lot of sense. Our 24-Pack Rack ups the useable cargo space from our 8-Pack Rack, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from Chromoly tubing and uses the same stainless-steel hardware (handily housed in a reusable Surly Tool Bag) supplied with our other rack. It offers the same height adjustability too, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore ass, so take your stuff out of that messenger bag and put it on the front of your bike. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 400mm

There’s a right waterproof backpack for everyone: The Velocity PS! The courier-style daypack Velocity is a favorite in the ORTLIEB collection. What's new: Handy details, new color concept and perfect if you want to do without the conventional tarp looks, because Velocity PS comes in a sustainable PVC-free material and you can go with the new PU coated nylon fabric. Designed with the ORTLIEB Messenger Bag in mind, this compact backpack is the perfect choice for students, or commuters, for every day, school, sports, or work. Velocity PS is sturdy and waterproof. Its trademark, the foam ventilated back, ensures carrying comfort along with breathability. Both the foam back and the ergonomic shoulder straps are improved for increased carrying comfort. The waist strap is adjustable or can be easily removed. Easy access roll-top closure with hook and loop guarantees 100% waterproofness and makes packing speedy and simple. In case the hook and loop fastener wears out after years of intensive use, simply return your pack to our ORTLIEB customer service and we will give your Velocity a second life. All components can be easily exchanged or repaired which makes Velocity a sustainable and lifelong companion. What’s new on the inside? All Velocity backpacks now feature an internal zippered organizer and a padded laptop sleeve fixed at the base and top taking computers (max. 15.4") and keeping them safe and dry. The lower edge protectors resist abrasion and wear. A bike light or helmet can be fixed to the back. Like all ORTLIEB products, Velocity PS is sustainably made in Germany. FURTHER FEATURES: - Carrying handle - Waist and sternum strap, adjustable and removable - Zippered organizer with laptop sleeve

The travel-master Logo has been updated with 3-D feet with perfect force absorption and an integrated screw attachment. The super-light mounting parts for mounting the stays to the frame and klick spring clamp as well. The Evo has the typical lower rail of the Logo classic, lowering the center of gravity and improving the riding stability. - Weight: 730g/1.6 pounds - Carrying Capacity: 40kg/88 pounds

This cycling-specific backpack uses pressurized air to tame discomfort and fine-tune to your personal fit. This is accomplished with multi-channel air chambers located in the hip belt and back contact areas inflate with an integrated micropump and release valve. Constructed from lightweight, durable 210 denier nylon, the form-fitting and aerodynamic Air BackPack features multiple storage compartments including a top-loading Hydra Core compartment and a side water bottle pocket; built-in, fold-out helmet holder and hidden pull-out rain cover. A clip-in Gear Core keeps gear like mini pumps, tools, tubes and more in separate pockets and can be removed when more storage is needed. This is the ultimate trail/adventure backpack for fun on two wheels. Features: - Top Carrying Handle - Air Mesh - Shoulder Strap - Hydra Core Compartment - Helmet Holder - MP3 Pocket - Rain Cover - Clips for Safety Light - Clips for Handy Phone Pack - Reflective Printing - Fits waist 28 - 38" (71 - 96cm)

Good news for all of those on the lookout for a convenient, waterproof bag to transport their belongings: the proven ORTLIEB "bike trunk" is now available with a Velcro roll closure! The closure of the Trunk-Bag RC (Roll-Closure) also serves as a convenient carrying handle. With a 12-liter payload and a shoulder strap, the waterproof bag that mounts on top of your bike rack is ideally suited for longer tours and brief forays to the supermarket. Even when the bag is fully loaded, your smartphone, wallet, and keychain remain quickly accessible thanks to the inside pocket and carabiner, as well as an additional, non-waterproof exterior pouch. The Rack-Lock Adapter, the winner of the Eurobike Award, ensures that the bag fits on virtually any bike rack with a width of 60 to 160 mm. Clip it on, secure it and remove it again. It's a snap!

The Frame-Pack RC Toptube is the solution for everyone who likes to have access to their water bottles while also carrying gear inside the bike frame triangle. This waterproof frame bag with roll closure is also ideal for full suspension mountain bikes, where space inside the frame's triangle is limited by the shocks. Part of ORTLIEB's bikepacking series, this bag with roll closure meets the IP64 standard for waterproofness, meaning your gear is fully protected from an involuntary bath. With its 4 liter volume, the Frame-Pack RC Toptube enables heavy equipment such as tent poles, tools or food to be carried within the frame triangle, maintaining the bike's low center of gravity. The customizable, sturdy, and strong Velcro fasteners enable simple and easy fastening and an uncomplicated installation. The frame pack RC Toptube is made in Germany and PVC-free. Together with the other products from the ORTLIEB bikepacking series, the frame pack RC Toptube forms the ideal equipment for an overnighter, a self-supported race, or your next big adventure. FEATURES: - Reflective logo on both sides of the bag

Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material

- The perfect quick-mount rear rack system attaches to road, cross, hybrid or touring bike seatstays. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.

The Topeak Pannier DryBag is constructed from a tough, sonically welded and seamed sealed waterproof material. A watertight roll-top closure provides maximum protection from trail dust, road spray and nasty wet weather. - Handle Loc system securely mounts pannier to rack and removes in seconds - Made from tough, sonically welded and seamed sealed waterproof material - Watertight roll-top closure provides maximum protection - Simply press button to rotate and move fully adjustable hook fore and aft to secure pannier to rack from sides - Reflective printing for increased nighttime visibility - Fits racks with 8, 10, 12, or 16mm diameter tubing - Includes shoulder strap Specifications: - Cargo capacity: 1220 cu in (20L) - Dimensions: 31.3cm (l) X 31.3cm (w) X 47cm (h) - Attachment: Topeak Handle Loc System - Fiber content: Nylon Composite - Material: Woven - Weight: 784g