Trailers/Strollers

Surly Trailer Parts - Attaches with proprietary mounting skewer (included) or proprietary mounting nuts for compatible frames (i.e. Surly Troll, Ogre, etc.)

Surly Trailer Parts

This adapter spaces out the Steel Hitch allowing bike frames with hooded/tight rear dropouts to have hitch clearance. This adapter is also used in breezer style dropout applications for proper hitch installation.

Burley replacement flag kit. Breaks down into two pieces. Reaches 6' high total.

Replacement safety flag for extra visibility.

The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night. - 5-LEDs - 4 modes (flashing, constant, chasing & random) - Includes: (1) Red Light & (2) AAA Batteries - Compatible with Burley trailers using a Light Bracket or Light Loop

The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.

The Robert Axle Project QR Hitch Adapter is a high quality, finely machined hitch adapter for towing single-arm trailers on bikes with 5mm quick release rear axles. Our stainless steel, QR Hitch Adapter helps trailer hitches fit more bikes, easily clearing hooded and interfering dropouts. Easy to install, by simply replacing the QR nut. Our adapter uses a 5mm hex to ensure your hitch and pre-cious cargo are more securely attached than other knurled adapters. The 5mm hex also isolates and protects dropouts from marring and over-tightening of the quick release when installing the hitch.

The Burley Ballz Nutted Axle Adapter includes a set of threaded Ballz that replace the nuts on your current nutted axle, enabling compatibility with the Coho XC cargo trailer. This adapter is required to use the Coho XC on bikes with nutted axles. - Official Burley Ballz adapter for bikes with nutted axles - Two Burley Ballz that thread onto the existing nutted axle - Quick and easy one-time installation - Specially designed for use with the Coho XC

This part connects the trailer with a round tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.

This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.

Ensure your pet’s trailer stays level during mid-ride breaks or pauses with The Bark Ranger™ Kickstands. Your dog will feel secure and comfortable with the added stability of these convenient kickstands. Biking or strolling, the Bark Ranger™ Kickstand helps your dog’s trailer stay level and steady when not in motion. Easy to fold and unfold, the kickstand can be installed on the front or back of the trailer to allow for stable loading and unloading. When you pause for a mid-ride water break or stop to talk to a friend during a stroll, the kickstand provides added stability to keep your pet feeling secure and comfortable. Pro tip: use the kickstand while training to stabilize the trailer during loading and unloading to help make your pet feel more at ease! You’ll Love – - Compatible with Bark Ranger™ and Bark Ranger™ XL pet trailer - Easily deploy to activate or fold to stow - Mounts to front or back of the trailer for stable loading and unloading of your furry friends Specifications: - Size L x W x H (in) 11.2 x 0.9 x 3 - Size L x W x H (cm) 28.5 x 2.3 x 7.5

Enables connection of the Coho XC trailer to bikes with QR skewers. These QR skewers replace the existing QR skewer on your bike to enable compatibility with the Coho XC cargo trailer. This adapter is required to use the Coho XC on bikes with QR skewers. The standard version of this skewer is included with the Coho XC out of the box. - Easily replace your rear QR skewer to attach the Coho XC - Quick and easy installation - Specially designed for use with the Coho XC

Surly Trailer Parts - These hitch mounts are for connecting Surly Bill and Ted trailers to any 10x1mm solid axle; they replace standard locknuts - They also include threaded stubs for direct mount to Surly Troll and Ogre frames; these frames have eyelets drilled into the dropouts specifically for these mounts

A skewer for your Surly Trailer.

This is our Excellent Adventure Thru-Axle. It upgrades your bike's rear end for hauling cargo trailers, should you feel like taking Rufus along on your errands. Extensive product testing with our Bill and Ted Trailers provided an "awesome experience," but time travel remains a risky endeavor. Designed for use with slotted horizontal or vertical single-position dropouts, the Excellent Adventure Axle is compatible only with 12 x 148mm hubs. Compatible Surly models include Skid Loader, our compact electric cargo bike, as well as Karate Monkey, Krampus, Grappler, Ogre, Lowside, ECR, and Troll. Once again, the 12 x 148mm hub requirement cannot be overstated. Visit your local Surly dealer to discuss other scenarios you may have in mind. - 12 x 148mm hub compatibility only - Designed for use only with Surly's Bill and Ted Trailers - Works with slotted horizontal or vertical single-position dropouts

Burley's Classic Hitch makes a great replacement for lost or damaged hitches. This replacement hitch attaches to the trailer's tow bar and switches easily between traditional bike frames.

Burley’s Quick Hitch allows for tool-free installation to connect the Travoy to the bicycle seat post. Attaches and detaches for easy transitions between bikes.

Add a liner to the seat for increased comfort and easy maintenance. Features: - Additional padding for increased child comfort - Simple installation and removal of the liner makes it easy to keep interiors clean - Compatible with Thule Sleek and Thule Spring

Surly Trailer Parts

Small but mighty, the Pet Trailer Pouch is the ultimate versatile storage solution. The large, zippered pocket is perfect for carrying smaller gear or for cleanly packing out pet waste. With integrated attachment points on the side of each pet trailer, securing the Pet Trailer Pouch is a breeze. Biking, hiking, or strolling, this added storage option is the perfect solution for you and your furry friend's next adventure.

Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.

At Burley, we want to make sure that everybody has the opportunity to take a trailer with them on every adventure. The Burley Thru Axle is our solution to bikes equipped with a 12mm thru axle. Male threading on the end allows a hitch to be attached, and any Burley trailer can then be used with a thru axle bike. Features: - Official Burley adapter for bikes with 12mm thru axles - External male threading to accommodate the installation of our axle mounted hitch system - Quick and easy one-time installation

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Find new horizons and discover new trails when you hitch your bike to a Coho XC cargo trailer using the Coho 5mm Skewer. Available in multiple lengths, simply replace your bike's current QR skewer with the Coho 5mm Skewer and you're ready to hit the trail. Note: The Coho 5mm Skewer is required for any bike with a QR skewer to connect to the Coho XC. This skewer will replace your bike's current skewer when using the Coho XC. Features: - Allows bikes with QR axles to connect to the Coho XC trailer - Quick and easy installation - Durable construction

Burley's adapter for bikes with a 12mm thru axle. Stock thru axles are not able to accommodate any sort of axle mounted hitch system. These thru axles have an external male threading on the end to accommodate the installation of Burley's axle mounted hitch system.

A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC

Find new horizons and discover new trails when you hitch your bike to a Coho XC® cargo trailer using the Coho® Thru Axle. Designed for bikes with 12mm thru-axles, the Coho Thru Axle is available in multiple thread pitches and lengths to accommodate a wide range of bikes. Note: The Coho Thru Axle is required for any bike with a 12mm rear thru-axle to connect to the Coho XC. Stock axles are not compatible with the Coho XC hitching system.

Find new horizons and discover new trails when you hitch your bike to a Coho XC® cargo trailer using the Coho® Thru Axle. Designed for bikes with 12mm thru-axles, the Coho Thru Axle is available in multiple thread pitches and lengths to accommodate a wide range of bikes. Note: The Coho Thru Axle is required for any bike with a 12mm rear thru-axle to connect to the Coho XC. Stock axles are not compatible with the Coho XC hitching system.

Find new horizons and discover new trails when you hitch your bike to a Coho XC® cargo trailer using the Coho® Thru Axle. Designed for bikes with 12mm thru-axles, the Coho Thru Axle is available in multiple thread pitches and lengths to accommodate a wide range of bikes. Note: The Coho Thru Axle is required for any bike with a 12mm rear thru-axle to connect to the Coho XC. Stock axles are not compatible with the Coho XC hitching system.