Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Other

$7.00
These straps are designed to effectively attach the ATTK IC and TANK storage systems to bikes without the necessary top tube braze-ons. A rubber shroud for cable ties to prevent damage to surfaces and increase grip. - Soft Rubber strip with a channel to house a cable tie - Slightly grippy to help prevent slippage - Can be cut down to fit smaller tubes Compatibility: The Frame Protection Strip is designed for cables ties betwen 2mm and 4mm wide. It can be used on any material, anywhere that you would normally use a cable tie. The Kit Includes: - 2 x 200mm long Frame Protection Strips - 2 x 250mm x 3.6mm cable ties
$12.00
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
$12.00
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
$17.00
Profile Design's Gap Cap works with 1" or 1 1/8" steer tubes to keep your headset adjusted properly at all times. The composite wedges are a fantastic choice for carbon steerers, and at 30-45 grams, you'll keep the front end of your bike super light.
$17.00
Profile Design’s Venturi Pads are the correct foam replacement pads for your Profile Design Century Aerobars (sold separately). They have adhesive on the bottom.
$18.00
Riser kits increase stack height to fit a wide range of riding styles for efficient positioning. Compatible with Profile Design's ZBS Aerobars, T Plus Carbon Series Aerobars, and T Plus Aluminum Series Aerobars. - Kit adds 1/2" rise and is non-adjustable to stack height. - Compatible with all Profile Design aerobars except for Century and Legacy models. - Kit includes a pair of 1/2" risers, bolts specific to riser size, and mounting hardware.
$22.00
Profile Design's UCM Aerobridge positions your computer between your aero extensions to give you an additional accessory mount. It features adjustable width so you can be sure of a great fit.
$24.99
Large surface area triathlon or TT aerobar armrest elbow pad with contoured edges to provide support and relieve pressure points. - F-35 Standard replacement pads are 16mm thick, built with moderate thickness to provide comfort in both training and race conditions - Made of EVA foam with anti-bacterial/anti-microbial Lycra cover - Compatible with F-35a Aluminum, F-35c Carbon, F-35i Injected, and F-35 Adjustable Armrests - Weight: 26g/pair
$24.99 - $28.00
Profile Design's Lux Pads keep both performance and comfort high, exactly where they need to be when you're pushing your boundaries. These velcro backed pads fit Profile Designs F-35 armrests (sold separately), and feature EVA foam, an anti-microbial cover, and a contoured edge for improved long-term comfort. They're even available in three thicknesses so you can dial in your fit to perfection.
$28.00
A rubber insert for base and road bars to reduce cable rattle and risk of damage. - Soft rubber inset to prtect cables and reduce noise The cable Grommet was designed as a small, but nice to have feature to supplement our bars. - The Grommet is designed for 15x9mm cable holes. - 20 pcs/bag - Construction: Soft rubber - Compatibility: 15x9mm cable holes - Bar Compatibility: Wing10a, DRV/AEROa, SVET R
$28.00
Replacement pads for the F-35TT Micro armrest. - Pad Construction: EVA foam with anti-bacterial/anti-microbial Lycra cover - Minimalist Shape: Small footprint armrest and minimalist pad designed specifically for TT usage.
$28.00
Replacement pads for the F-40TT armrest.
$31.00
The Race and Ergo Ultra pads allow riders to tune their setups for a snug fit. - New foam that resists being crushed for longer periods of time - Improved surface durability - Superior grip with a molded-in textured surface - Compatible with both the Ergo and Race armrest kits - Dimensions: Race (92.9mm x 887.5mm) or Ergo (108.4mm x 87.5mm) - Compatibility: Race / Ergo - Weight: 5mm: 21g / 10mm: 37g
$39.99 - $45.00
Fits Profile Design's F-18 through F-22 Series armrests, providing a low profile mount for arm pads. - Construction: 6061-T6 Forged Aluminum - Availability: Two kits to choose from: 31.8mm for flip-up styles or available in 31.8 for non flip-up style. - Weight: 65-70g - Does not include bottom clamp
$40.00
The J5 BTA is specifically designed to integrate with the J5 Bracket featured on the new T+ Carbon Aerobar Systems. Building the BTA mount into the bracket system streamlines the cockpit, providing improved performance while the bolt-on mount stays secure on the roughest of roads. Moving the system away from extensions opens up hand positions. - Construction: 3D Forged 6061-T6 AL - Compatibility: Standard Bottle Cage or AeroHC - Adjustability: 3 Fore/Aft Positions - Weight: 45g *Extensions must be at 100mm width (Center – Center)
$42.00
The Aeroport RS910 adaptor offers the capability to tidy up Di2 routing on Tri/TT bikes along with improving access for the adjustment and charging. Performance: The Aeroport RS910 adapter fits the BTR2 internal battery and Aeroport RS910 bar end junction into the rear of a set of aluminum series extensions or 35c+ extension.This makes battery placement and cable routing through the frame easier and more secure. As well as avoiding the need for an unsightly mess of cables as typically seen with an EW junction box, or the inconvenience of hiding the junction box in the stem or frame. Compatibility: The adapter is only compatible with 22.2mm OD aluminum series extensions or a 35c+ carbon extension at this stage, with an ID of 19.4mm - Construction: Injected nylon/glass fiber - Clamp Compatibility: 22.2mm OD / 19.4mm ID - Extension Compatibility: 35a, 45/25a, 50a, 35c+ - It is designed to fit the following Di2 parts: RS910 Junction box, BTR2 Internal battery, SD50 cables - Di2 parts are not included with the adapter. - Note that the adapter will not fit in an aerobar like the Profile Design Aeria Evo as the rear of the extension is not accessible
$45.00
Profile Design's Aerobar Bracket Riser Kit lets you customize the height of your Profile aero bar brackets and extensions for finding a perfect riding position. The kit includes two 10mm risers, two 5mm risers and appropriate-length bolts. Multiple kits can be used if you need more height. Note that this kit is not recommended for Profile Design's Carbon Stryke or T-mag bars.
$45.00
F35TT Micro is a sub-compact design focused on performance. Excess bulk has been removed, providing more room on the bar for additional hand positions. The 4 mounting holes allow for adjustment to fine-tune positioning. - Armrest Material: 6061-T6 AL - Armpad material: EVA Closed Cell Foam - Compatibility: J2/J3/J4/J5/L1/L2/Aeria/Aeria Ult - Size: 85mm X 50mm - Stack: 14mm - Reach Adjustment: 15mm Increments - Width Adjustment: Fixed - Rotational Adjustment: +/- 7.5 - Weight: 80g
$51.00
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 35a is a 35° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35a is a straight 35° bend. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 340mm or 400mm - Outer Diameter: 22.2mm - Construction: 6061-T6 aluminum, pre-drilled for bar-end shifter cable routing - Weight: 200g/pair
$51.00
The Ergo is the core of our new family of fit and comfort focused armrests. It offers a smoothly curved shape designed to comfortably cup the elbows while providing good support and control. The bolt pattern yields 48 possible configurations just by moving the armrest. The Ergo is compatible with all current aerobars and earlier models that used the F-19, F-22, F-35 or F-40 armrests. - Armrest Construction: Injected Nylon/Glass Fiber - Pad Construction: EVA foam with anti-bacterial/anti-microbial Lycra cover - Pad Model: 10mm - Color: Matte Black - Hardware: M6 x 10 FHB - Weight: 145g/pair
$73.00
Profile Design's aero-bar extensions are made of light and durable 6061 aluminum, come in different bends to suit all riding positions and feature the standard 22.2mm diameter to fit Profile and other brand base bars and extension mounts (base bars and mounts sold separately). The T2+ DL extensions have an aggressive S-bend popular for time-trials and triathlons, and the included extension bridge makes them ITU Draft Legal. They also have holes in them for internally routing your cables.
$78.00
Get low with the new V+ Series low stack bracket. V+ Series low stack extensions mirror popular T+ Series extension shapes with ergonomic modifications to improve comfort in low stack positioning. - Construction: 6061-T6 aluminum, pre-drilled for bar-end shifter cable routing - Outer Diameter: 22.2mm - Weight: 204g/pair
$91.00
L2 bracket features an aggressive low profile position and fit capabilities. Placing the extension mount below the basebar allows for a 2cm drop in stack over extensions mounting above the basebar, making it the lowest stack available for any clip-on style aerobar system. The updated and enhanced bolt pattern combined with the F40tt armrest boasts an expansive 32 unique armrest positions per side. - Materials: Forged 6061-T6 AL - Stack Height: 23mm - Width Adjustment: 37mm - Basebar Clamp Diameter: 31.8mm - Extension Clamp Diameter: 22.2mm - Weight: 220g
$96.00
Ergonomic Legacy II Aerobars feature extensions that provide a variety of hand positioning, and width and rotational armrests with a high stack to achieve a relaxed ride position. Ideal for riders that need extra positions for Centuries. - Injected Venturi Armrest and ZB Bracket - Forged 6061-T6 construction with armrest made of injected nylon and glass fiber - Fixed extension adjustment - Extension angle 44 degrees with 58mm rise - Fits both 26.0 and 31.8mm basebars, shims included
$99.99
Get the aero advantage on long rides with the Century Aerobars. The one-piece design has a higher, more comfortable position for comfy centuries, charity rides or triathlons. These light aluminum aerobars offer a wide array of comfortable hand positions. And, you can adjust the width of the arm pads for a custom fit.
$105.99 - $113.00
Profile Design's Multi-Fit System Kit allows early model Profile Design aero bars to work with 26.0mm and 31.8mm handlebars. This fine 6061-aluminum upgrade gives you the excellent adjustability of Profile's F-19 armrests that feature length, width and rotational settings. You'll also appreciate the supportive, comfortable Lycra-covered foam F-19 pads. Plus, on the Flip-Up model, the brackets flip up and out of the way so that you can hold onto the tops of the base bar and stand and climb with no worries about your knees hitting the armrests.
$125.00
The core of Profile Design's T-Carbon aerobar line, the J5 bracket was built for adjustability with features that enable a customized fit to dial in rider position. The Inline Compression Clamp (ICC) provides single bolt extension adjustment that is simple, secure and easy to use. - Standard on all new 2017 model T Plus Carbon Series Aerobars - Stackable with risers to elevate the armrest up to 70mm of extra height adjustment - The offset BTA bridge (not included) when combined with the new F-40TT armrest gives more expansive width and reach adjustments with a total of 32 armrest positions per side - Constructed of forged 6061-T6 Aluminum - Stack Height: 42mm - Width Adjustment: 37mm - Basebar Clamp Diameter: 31.8mm - Extension Clamp Diameter: 22.2mm - Weight: 266g
$148.00 - $154.99
Light, comfortable, and stable, Profile Design's F-35 Carbon Armrest Kit provides excellent adjustability for finding your perfect position. These versatile carbon fiber armrests have an ergonomic shape, 15 degrees of rotational adjustment, and 3 fore/aft positions with a total of 30mm of adjustment. You'll also love the comfortable Lycra-covered 16mm-thick EVA foam pads that simply attach to the armrests with adhesive-backed Velcro so no straps are required. The pads also have contoured edges for additional comfort and they're even antibacterial.
$157.49 - $182.49
Profile Design's aero-bar extensions are made of feathery light carbon fiber, come in different bends to suit all riding positions, and feature the standard 22.2mm diameter to fit Profile and other brand base bars and extension mounts (base bars and mounts sold separately). The T2+ model has an aggressive S-bend popular for time-trials and triathlons. They are also drilled to accommodate internally routed cables or electronic shift systems. Extension Shape: The T2+ Carbon is aggressively designed for race-oriented riders looking for the most aerodynamic positioning. The S-Bend extension shape combined with the 30mm rise, provides a variety of low hand placement positions.
$158.00
The Sonic/Ergo/45AR aerobar offers comprehensive yet simple adjustments, ideally suited to riders wishing to add aerobars to their road, gravel, or bikepacking bike. The Sonic/Ergo platform offers a large range of adjustments in every dimension, enabling riders to optimize the comfort of their positions. This bar can be used for draft-legal triathlon once shortened to meet the ITU Rules. - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo Ultra / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Extension Width: 100mm - Weight: 545g
Page 1 of 2 Next page