Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Other

$262.00
The Supersonic bracket (previously know as the J5) is the first and premier model of the new generation Profile Design brackets. It offers easier adjustments and a greater fit range than anything that came before it. Pairing this bracket with the ergo armrest offers industry-leading fit options and greater comfort. With the 35c extensions, this aerobar is suited to riders who wish to adopt an aerodynamic arrowhead hand position. Performance - The Supersonic/Ergo platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments. Fit Data - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 58.5mm (no riser kit) to 138.5mm in 5mm increments (With aftermarket Riser Kit) - There are 80 distinct position options achievable just by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. Origin The supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made. The Ergo armrest is an integral part of the overall adjustability scheme. The dual-offset design (shared with Race and Boom armrest) gives the most precise adjustment range of any armrest on the market. This, along with the evenly curved shape, allows it to work well for the majority of riders. Extensions - Extension Shape: The 35c extensions offer a 35 deg ski bend shape. This facilitates a slightly turned-down wrist position to create a streamlined hand position. They are 400mm long and can be cut to size to suit nearly ever rider. They are drilled for rear-exit cable routing. - Bracket: Supersonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added)
$262.00
The Supersonic bracket (previously know as the J5) is the first and premier model of the new generation Profile Design brackets. It offers easier adjustments and a greater fit range than anything that came before it. Paring this bracket with the ergo armrest offers industry leading fit options and greater comfort. Performance The Supersonic/Ergo platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments. Fit Data - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 58.5mm (no riser kit) to 138.5mm in 5mm increments (With aftermarket Riser Kit) - There are 80 distinct position options achievable just by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. Origin - The supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made. - The Ergo armrest is an integral part of the overall adjustability scheme.The dual - offset design (shared with Race and Boom armrest) gives the most precise adjustment range of any armrest on the market. This, along with the evenly curved shape, allows it to work well for the majority of riders. Extensions - Extension Shape: The 4525c extensions offer a 45 deg lower and 25 deg upper section with a 7.5mm lateral shift per side. This allows the rider to choose between a low, short reach position or a high hands, stretched position for aerodynamics. They are 400mm long and can be cut to suit nearly every rider. They are drilled for rear-exit cable routing. - Bracket: Supersonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added)
$262.00
The Supersonic bracket (previously know as the J5) is the first and premier model of the new generation Profile Design brackets. It offers easier adjustments and a greater fit range than anything that came before it. Paring this bracket with the ergo armrest offers industry leading fit options and greater comfort. Performance The Supersonic/Ergo platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments. Fit Data - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 58.5mm (no riser kit) to 138.5mm in 5mm increments (With aftermarket Riser Kit) - There are 80 distinct position options achievable just by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. Origin - The Supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made. - The Ergo armrest is an integral part of the overall adjustability scheme. The dual - offset design (shared with Race and Boom armrest) gives the most precise adjustment range of any armrest on the market. This, along with the evenly curved shape, allows it to work well for the majority of riders. Extensions - Extension Shape: The 50c extensions offer a 50 deg ski bend shape with a 7.5mm (per side) lateral shift. This allows a neutral wrist angle with the capability to fine tune the grip width. They are 400mm long and can be cut to suit nearly every rider. They are drilled for rear-exit cable routing. - Bracket: Supersonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added)
$199.99 - $255.00
Profile's T5+ Clip-on Aerobars are made of feathery light carbon fiber and feature super-shallow 15-degree ski-bend extensions with length, width, and armrest adjustments so you can easily find a perfect aero position. These clip-ons have Profile's J4 brackets for a low, aero arm position and their comfy, adjustable F-35 armrests.
$249.00
The V2+ Carbon introduces a new extension paired with the new L2 bracket. The V2+ extension is built up on a variation of the T2+ extension bend, featuring a higher rise S-bend to compensate for the lower mounting position of the extensions. The low stack bracket places the extension below the basebar with a stack height of 2.25cm below the T-series aerobars. Combining the L2 bracket and F40TT armrest offers small incremental adjustments, producing our best ever reach and width range. - Bracket: L2 Bracket - Armrest: F40tt - Armrest Stack: 37.5mm - Armrest Reach: -31.85mm to -76.85mm (7.5mm Increments) - Armrest Width (C-C): 183.2mm to 294.2mm (100mm Ext. Width) - Extension Length Adjustment: 211mm to 343mm (center of basebar to tip) - Extension Length: 366mm - Extension Height: 84mm - Extension Angle: 10° - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 550g
$249.00
The V4+ Carbon introduces a new extension paired with the new L2 bracket. The V4+ extension is a variation of the T4+ extension bend, featuring a higher-rise Ski-bend to compensate for the lower mounting position of the extensions. The clamp design places the extension below the basebar with a stack height of 2.25cm below the T-series aerobars. Combining the L2 bracket and F40TT armrest offers small incremental adjustments, producing our best ever reach and width range. - Bracket: L2 Bracket - Armrest: F40tt - Armrest Stack: 37.5mm - Armrest Reach: -31.85mm to -76.85mm (7.5mm Increments) - Armrest Width (C-C): 183.2mm to 294.2mm (100mm Ext. Width) - Extension Length Adjustment: 211mm to 343mm (center of basebar to tip) - Extension Length: 366mm - Extension Height: 84mm - Extension Angle: 30° - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 550g
$214.00
The 35c+ extensions offer a slightly higher rise then the orginal T4c and are half the weight - saving 12g in their uncut form. The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 35c+ is a 35° bend in aluminium. Performance: The sole purpose of extensions is to provide a comfortable position for the rider's hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position, which is why we provide different fit options so each rider can chase their best performance. Fit Data: - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35c+ is a straight 35° bend. - Length: 400mm - Outer Diameter: 22.2mm - Inner Diameter: 19.4mm - Construction: Carbon - Weight: 142g/pair Tech Guide: - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips.
$214.00
The Subsonic/Race/35a aerobar combines the low stack Subsonic bracket with the arm-hugging Race armrest to offer an industry-leading fit range oriented towards low, narrow positions. The 35a extension offers a comfortable 35 degree angle with a 80mm rise. This is the only low stack clip-on in the market that maintains the pad-to-grip angle as the bar is stacked up Subsonic is not just another aerobar bracket. It brings our next-generation fit range to a low stack bracket design. This allows the bar to use our riser kits to increase the stack without changing the relationship between the armrest and the grips. The Race armrest has been designed to tightly cup the riders arms – facilitating a narrow position and increasing control at speed. Performance - The Subsonic/Race is designed to achieve a lower stack height than standard aerobars, without the added frontal area of a below-the-basebar extension clamping system. This improves aerodynamics and the fit range. Fit Data - Armrest offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 142mm to 272mm in 18.5mm steps (with Extensions at 100mm) - Armrest Stack: The minimum is 40mm and the bracket is compatible with our existing risers which add up to 70mm of stack in 5mm increments. - The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut. There are 80 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1200 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable low stack clip-on on the market. Origin Story After we released the Supersonic (J5) as a premium bracket with market leading fit options and verstility we wanted to bring the same kind of options to teh rest of our range of brackets and thus aerobars. Where our supersonic and Sonic brackets have a minimum stack of around 60mm, like most of the popular aerobars - we wanted the Subsonic to offer a substantially lower position. This helps the segment of the market who struggle to get into their ideal position with modern bike frames. And it was vital that we include stack height adjustment without altering the pad grip relationship - so our riders have the ability to fine-tune every aspect of their setup. The Race armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrest, smaller increments of movement are achieved - making it simple to fine-tune a rider's position or match the position from their previous aerobar or bike. Additionally, there are two thicknesses of cushion available to ensure a snug fit for different sized arms. Who is it for - This bar is perfect for riders who wish to achieve lower positions than are possible with standard aerobar designs. Unlike other low stack bars, it allows fine-tuning of the stack height so the rider is not limited to only one armpad height. With the Race armrests fitted, it is tailored towards riders who intend to be low and narrow to punch the smallest possible hole through the wind. - Bracket: Subsonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Race / 5mm Pads - Extension Length: 350mm - Width: 142mm to 272mm - Weight: 590g
$183.00
The Airstryke II takes the features of the ever popular Airstryke and adds an expanded fit range and more comfortable armrest. The flip up bracket and classic shape are retained. Performance The Airstryke II is intended to allow riders to add aerobars to their road or adventure bike without sacrificing the ability to hold the bars close to the stem. The comfortable grip angle and smoothly curved armrest offer a relaxed position for long days in the saddle. Fit Data - Armrest Offset: -85mm to 17.5mm in 7.5mm steps - Armrest Width: 131mm to 298mm in 18.5mm steps - Armrest Stack: 40mm Origin As one of the most popular model in the history of aerobars it seemed appropriate to update the much loved Airstryke with our new generation fit range and comfort focused armrest. We didn't want to change the elements that have made the bar so successful and the changes made just enhance the adjustability and comfort. - Bracket: L2 Flip-Up - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo Armrest - Armrest Stack: 40mm - Reach: -85mm to 17.5mm in 7.5mm steps - Extension Adjustment: 150mm (center of basebar - end) - Armrest Width: 155mm - 203mm - Weight: 592g
$157.49 - $182.49
Profile Design's aero-bar extensions are made of feathery light carbon fiber, come in different bends to suit all riding positions, and feature the standard 22.2mm diameter to fit Profile and other brand base bars and extension mounts (base bars and mounts sold separately). The T2+ model has an aggressive S-bend popular for time-trials and triathlons. They are also drilled to accommodate internally routed cables or electronic shift systems. Extension Shape: The T2+ Carbon is aggressively designed for race-oriented riders looking for the most aerodynamic positioning. The S-Bend extension shape combined with the 30mm rise, provides a variety of low hand placement positions.
$182.00
The Profile Design Flip/Ergo platform is designed to give riders the freedom to find an optimal low stack position with the ability to hold the bar tops when climbing. There are 80 distinct position options achievable just by moving the armrests. As a clip-on bar it is also possible to adjust the extension width, length, and tilt easily. - 50a extensions offer a 50deg ski bend shape with a 7.5mm (per side) lateral shift - Extensions 340mm long and can be cut to size to suit nearly every rider - Bracket: Flip - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 112mm to 280mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: 40mm - Weight: 587g
$182.00
The Hypersonic/Ergo platform is designed to give riders a low stack bar with easy adjustability of extension length and rotation. The Hypersonic bracket offers our new generation fit range in a low stack, under-mount format. Pairing this bracket with the ergo armrest offers industry-leading fit options and greater comfort. With the 50a extensions, this aerobar encourages a neutral wrist angle. - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 112mm to 280mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 39mm
$179.00
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 35c is a 35° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35c is a straight 35° bend. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 400mm - Outer Diameter: 22.2mm - Construction: Carbon - Weight: 262g/pair
$179.00
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 45/25c is a 45° / 25° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - The 45/25c extensions have a first section at 45° and the grip at 25°. The rider can choose whether to hold high for the shrugged position or low for a more open, head up position. - The 45/25a offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. Origin - Recent trends in aerobar fit have been towards higher hand positions, so we've increased the rise compared to previous generation extensions. We have focused on the most popular angles from our previous range and added the 45/25c as a multi position option. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 400mm - Outer Diameter: 22.2mm - Construction: Carbon - Weight: 242g/pair
$179.00
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 50c is a 50° bend in carbon. Performance - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - Extension Shape: A 50c extensions offer a 50° ski bend shape. - The 50c offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. Origin - Recent trends in aerobar fit have been towards higher hand positions, so we've increased the rise compared to previous generation extensions. We have focused on the most popular angles from our previous range and added the 50c as a multi position option. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so they do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 400mm - Outer Diameter: 22.2mm - Construction: Carbon - Weight: 268g/pair
$179.00
The ultra shallow 15° carbon extension bend maintains the high-performance aggressive position of straight extensions with the comfort of a ski-bend. - Extension Shape: The ultra shallow 15° extension bend maintains the high-performance aggressive position of straight extensions with the comfort of a ski-bend. - Outer Diameter: 22.2mm - Colors: Gloss UD Carbon Black - Construction: Multi-layered carbon fiber, pre-drilled for bar-end shifter cable routing - Weight: 164g/pair
$171.00
Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 60mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit) - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility, we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line, we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests, smaller increments of movement are achieved – making it simple to fine-tune a rider's position or match the position from their previous aerobar or bike. Extensions - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35a is a straight 35° bend. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g
$171.00
The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Stack: 60mm to 70mm in 5mm increments (with aftermarket Riser Kit) - Extension length and rotation can be easily adjusted using the top bolt - Weight: 545g
$171.00
Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update, it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility, we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line, we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests smaller increments of movement are achieved – making it simple to fine tune a riders position or match the position from their previous aerobar or bike. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g
$167.00
Super light, comfortable and stable, Profile Design's F-25c Armrest Kit provides excellent adjustability for finding your perfect position. These beautiful carbon armrests have an ergonomic shape and 15 degrees of rotational adjustment to get them fitting just right. You also get supportive and comfortable pads and recessed, rust-resistant hardware (not shown). - 75 grams (kit)
$158.00
The Sonic/Ergo/45AR aerobar offers comprehensive yet simple adjustments, ideally suited to riders wishing to add aerobars to their road, gravel, or bikepacking bike. The Sonic/Ergo platform offers a large range of adjustments in every dimension, enabling riders to optimize the comfort of their positions. This bar can be used for draft-legal triathlon once shortened to meet the ITU Rules. - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo Ultra / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Extension Width: 100mm - Weight: 545g
$158.00
The Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms Performance: The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position despite a fairly minimalist appearance the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Extensions: The T5 extension features a 13° ski-bend designed to give a range of aerodynamic hand positions. - Bracket: Sonic - Armrest: Ergo - Armrest Offset: -70mm to -2.5mm (7.5mm Increments) - Armrest Width: 124mm to 290mm (18.5mm Increments) - Armrest Stack: 60mm - 130mm (w/ aftermarket riser kits) - Extension Length Adjustment: 25mm - 275mm (center of basebar to tip) - Extension Length: 348mm - Extension Height: 80mm - Extension Angle: 13° - Extension Material: 6061-T6 aluminum, pre-drilled for bar-end shifter cable - Armrest Rotation: 7° - Center Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 554g
$158.00
V4 Plus Aerobars have shallow-bend extensions designed to provide a more aggressive ride position with relaxed wrist angle. The aerobar features a low stack armrest position and forged bracket system that places the extensions below the basebar. - L1 Brackets: 6061-T6 Aluminum forged bracket system designed to place the armrest at the lowest stack possible and the extensions underneath the basebar - F-19a Aluminum Armrests: 4x fore/aft positioning, providing 45mm of adjustment while also allowing for 15-degrees (+/- 7.5-degrees) of rotation adjustment to angle armrests for a customized fit and Velcro-backed EVA foam pads that affix directly to armrest without straps - Extensions design specific for under-the-bar mounting Tech specs: - Extension: V4+ Aluminum - Stack: 35mm - Reach: -90mm, -75mm, -60mm, -45mm - Width: 150mm - 305mm - Extension Adjustment: 160mm – 275mm - Clamp: Fits 26.0mm and 31.8mm bars - Weight: 480G
$148.00 - $154.99
Light, comfortable, and stable, Profile Design's F-35 Carbon Armrest Kit provides excellent adjustability for finding your perfect position. These versatile carbon fiber armrests have an ergonomic shape, 15 degrees of rotational adjustment, and 3 fore/aft positions with a total of 30mm of adjustment. You'll also love the comfortable Lycra-covered 16mm-thick EVA foam pads that simply attach to the armrests with adhesive-backed Velcro so no straps are required. The pads also have contoured edges for additional comfort and they're even antibacterial.
$125.00
The core of Profile Design's T-Carbon aerobar line, the J5 bracket was built for adjustability with features that enable a customized fit to dial in rider position. The Inline Compression Clamp (ICC) provides single bolt extension adjustment that is simple, secure and easy to use. - Standard on all new 2017 model T Plus Carbon Series Aerobars - Stackable with risers to elevate the armrest up to 70mm of extra height adjustment - The offset BTA bridge (not included) when combined with the new F-40TT armrest gives more expansive width and reach adjustments with a total of 32 armrest positions per side - Constructed of forged 6061-T6 Aluminum - Stack Height: 42mm - Width Adjustment: 37mm - Basebar Clamp Diameter: 31.8mm - Extension Clamp Diameter: 22.2mm - Weight: 266g
$105.99 - $113.00
Profile Design's Multi-Fit System Kit allows early model Profile Design aero bars to work with 26.0mm and 31.8mm handlebars. This fine 6061-aluminum upgrade gives you the excellent adjustability of Profile's F-19 armrests that feature length, width and rotational settings. You'll also appreciate the supportive, comfortable Lycra-covered foam F-19 pads. Plus, on the Flip-Up model, the brackets flip up and out of the way so that you can hold onto the tops of the base bar and stand and climb with no worries about your knees hitting the armrests.
$99.99
Get the aero advantage on long rides with the Century Aerobars. The one-piece design has a higher, more comfortable position for comfy centuries, charity rides or triathlons. These light aluminum aerobars offer a wide array of comfortable hand positions. And, you can adjust the width of the arm pads for a custom fit.
$96.00
Ergonomic Legacy II Aerobars feature extensions that provide a variety of hand positioning, and width and rotational armrests with a high stack to achieve a relaxed ride position. Ideal for riders that need extra positions for Centuries. - Injected Venturi Armrest and ZB Bracket - Forged 6061-T6 construction with armrest made of injected nylon and glass fiber - Fixed extension adjustment - Extension angle 44 degrees with 58mm rise - Fits both 26.0 and 31.8mm basebars, shims included
$91.00
L2 bracket features an aggressive low profile position and fit capabilities. Placing the extension mount below the basebar allows for a 2cm drop in stack over extensions mounting above the basebar, making it the lowest stack available for any clip-on style aerobar system. The updated and enhanced bolt pattern combined with the F40tt armrest boasts an expansive 32 unique armrest positions per side. - Materials: Forged 6061-T6 AL - Stack Height: 23mm - Width Adjustment: 37mm - Basebar Clamp Diameter: 31.8mm - Extension Clamp Diameter: 22.2mm - Weight: 220g
$78.00
Get low with the new V+ Series low stack bracket. V+ Series low stack extensions mirror popular T+ Series extension shapes with ergonomic modifications to improve comfort in low stack positioning. - Construction: 6061-T6 aluminum, pre-drilled for bar-end shifter cable routing - Outer Diameter: 22.2mm - Weight: 204g/pair
Page 1 of 2 Next page