Parts & Accessories

- Quick sealing and stop punctures up to 1/4 inch - Can be used year around - -09: Box of 12 bottles

- Shim adds support to Presta stem used in a Schrader rim

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.

These oversized Presta valve nuts are specifically designed to provide extra clearance and extra leverage to better tighten tubeless valves. They're especially helpful on single-wall rims. -Concave to allow better engagement of the valve/rim interface -Oversize to provide extra torque when tightening -Especially helpful on single-wall rim tubeless setups -CNC-machined AL-6061

- Permanently seals tube punctures up to 1/8 inch - Non toxic formula installs easily through Schrader valves - Complete with valve core remover and filler tube - Slime keg fills 160 tires at 1/2 the price per ounce of the 16 oz size

Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients

Laugh in the face of punctures with Muc-Off's super lightweight inner tube sealant! The No Puncture Hassle Inner Tube Sealant is easy-to-install, and the cutting edge molecules seal holes in tubes of up to 4mm, ensuring that your ride is uninterrupted. - Proprietary water-based non-hazardous formula developed specifically for use with inner tubes - Compatible with a wide range of tube sizes and bikes - suitable for commuter, folding, urban, touring, MTB and e-bikes - Works on multiple punctures - Lasts the life of the inner tube/tire - Contains cutting-edge molecules to help seal holes quickly and effectively; seals holes in tubes up to 4mm

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.

The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.

Tubeless valves for DT Swiss rims for repair or replacement. - DT Swiss Narrow Base Tubeless Valve - 32mm

Orange Seal’s rim tape comes in 18mm, 24mm, and 45mm widths fitting most bike rims. The elasticity of the tape allows greater flexibility in fitting different types of rims and form factors.

Profile Design's Tire Levers are made of light and durable nylon which won't scratch or harm rims of any material, and which slides nicely for easier tire removal, too. Each lever has a hook on the end so that you can pry the tire partly off with the lever, hook the lever on a spoke and leave it in place. You then repeat the process on the next tight tire section with another lever, and use your third lever to work around and pry and slide until you've fully removed the tire.

- 2-ply rubber shield fits between tire and tube to prevent flats - Pair

Tubeless repair kit from Muc-Off.

Subzero tire sealant. It's formulated to maximize extreme frigid temperature; enabling riders in the far North to ride with flat protection. All while offering the same quick-sealing properties you’ve come to expect. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/4" with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients - Subzero sealant is developed for use in below-freezing conditions down to -20F

- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened

Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal

- Flat Protection - Seals Up To 1/4-Inch Punctures - Can Be Used In Tubeless, Tubular & Tubed Applications - Contains Micro-Sealing Particles - Sealant Does Not Freeze - CO2 Compatible - Compatible With All Serfas Tire RX Sealant Kits

Continental's Revo Sealant is specifically designed for use with their Revolution tubeless-ready tires and it's great for tubular tires, too. It seals punctures and contains no protein or ammonia so it's safe for use in all wheels, too.

- Made of durable light weight polyurethane - Provides a protective layer between road hazards and the inner tube - Weighs less than liquid fills and thorn-resistant tubes - Can be reused - Easy, mess free installation

- Ammonium/latex/protein free sealant

The Lizard Skins Tube Strap is an easy way to stow a spare tube. The minimally designed Tube Strap is a lightweight on-bike storage solution for any rider. This versatile strap is made to securely attach under seats and other locations on bike frames. - On-bike storage solution - Inner sleeve to compress a tube - Silicone strips for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 1.3oz (37g)

No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes. - Available in a number of lengths and colors to perfectly fit your rims and your sense of style. - Includes two valves

When inserted between the bike tire and tube, KENDA Tube Protectors provide a protective layer between road hazards and the inner tube. The tire and the protector work together to prevent sharp objects from puncturing the inner tube. - Guaranteed to prevent flats and made in the USA! - Lightweight - Weighs less than liquid fills and thorn-resistant tubes - Easy installation - no gooey mess - Absolutely, positively, will not cause tire or tube to damage or loosen spokes - Eco-friendly and reusable from bike to bike and biodegradable when disposed

Compact tubeless tire repair kit with machined aluminum storage tube that doubles as a handle. Combined tire reamer and insertion tool. Includes five tire plugs. - Weight: 47g